remote control SPecification
I. Remote Controller and Control Panel
There are three buttons on the control panels of the remote control and electric fireplace. The
buttons with the same characters have the same function.
A. POWER SWITCH: This is a rocker switch for the mains power of the electric fireplace, the
switch is located on the right hand side underneath the log set.
B. CONTACT SWITCH: This is a safety switch. When the power switch is placed on
I
, there will
be a tone when you place back the log set. The tone means the unit is well connected, and the
product is in standby mode.
C. CONTROL PANEL: There are two control panels on both sides.
Control Panel on Right: including ON/OFF, LOW, HIGH
Control Panel on Left: including and DIMMER-
ON/OFF: power on/off
LOW: press this button to have low heating (700W), press again to turn off heating
HIGH: press this button to have high heating (1500W), press again to turn off heating
and DIMMER-: flame adjustment, for higher flame effect and dimmer- for
lower flame effect
D. The opening on both sides are the infrared receivers for the remote control, the signal will be re-
ceived through the grid to the bump. Do not cover the grid. When using the remote control, please
note the left side is for dimmer control and right side is for on/off and heating control, these are the
same features as for the manual control panel.
8
D
C
B
A
C
D
