20. Please use the socket with excellent earth, fuse and earth electrode.
21. Please pull out the power plug when cleaning, maintaining or removing the fireplace.
22. Please keep the fireplace and wiring dry when transporting or storing them (remove the water
before moving the fireplace). Avoid strenuous vibration to prevent damage to the fireplace.
23. In order to avoid overheating, do not cover the heater.
24. The heater must not be located immediately below a socket-outlet.
25. If you do not use the appliance for a longer period of time. Clean the transducer, remove water
from the container, and leaf no water in the black reservoir.
inStallation
This section is the guidance for electric fireplace installation
Leave a clearance of at least 1cm between the fireplace recess and the surround of the fireplace to
ease installation. The electric fireplace does not need a flue.
Warning
1. The power socket shall be AC230V/15A three-core socket with excellent earth, fuse and earth
leakage protection.
2. Note:
In order to avoid overheating, do not cover the heater. Do not scrape the plastic off the core of
fireplace or install the core directly on a soft surface. Otherwise, it may block the air circulation and
cause fire accidents.
Install the electric fireplace in dry and safe places free from dust and flammable articles. Please
ensure that objects such as curtains not to block the outlet.
3. When installing the electric fire ensure that the grids are not covered to ensure that fresh air is
supplied.
4. It is possible that the flames become lower when the heating function is switched on. This can be
prevented by placing the surround 10 mm from the wall.
reminder
1. It is advisable to install the electric fireplace near the socket to ease electric installation.
2. First place the electric fireplace on the selected position to see whether it is satisfactory.
3. This electric fireplace is not allowed to be installed directly onto a wall. Place the mantel in the
desired location or build a fireplace recess in the desired location on the floor near the wall. The
size of the recess should be:
Model
Specification of The Opening
W
H
D
MF1630H
45.0cm
66.0cm
26.0cm
MF1610H
63.5cm
68.5cm
26.0cm
When placing the fireplace or building the wall structure, please place the insert in dry, safe
and clean place.
4