CHAPTER 1. OVERVIEW | 2
1.4 System Requirements
•
USB 2.0 equipped computer
•
Pentium4 or above
•
512MB of RAM
•
Windows 8 / 7 / Vista / XP (32-bit or 64-bit)
•
Sound card
•
CD ROM drive (For software installation)
1.5 Package Contents
•
GrabBee-HD Device x 1
•
GrabBee-HD Software & Manual CD x1
•
Quick Installation Guide x 1
1.6 Hardware device description
CHAPTER 2. INSTALLATION | 3
※
Do not connect GrabBee-HD to computer USB port before driver installation
※
Please follow the steps to install Driver and Software
Steps : 2.1 Install Device Driver
2.2 Install DivX+ Software
2.3 Install Application Software
2.4 Plug in GrabBee-HD hardware
Please insert "Multimedia Installation Kit" CD-ROM into your CD-ROM drive; AutoRun will run.
(if AutoRun didn’t run, please go to “My Computer”, click CD-ROM drive)
Select “GrabBee-HD” product.
2.1 Install Device Driver
2.1.1 Select “Device Driver”
2.1.2 Setup wizard is running.
2.1.3 Follow the instructions to installation Device Driver.
2.1.4 When the Windows Security pop up a dialog “Would you like to install this device software?”
Please check “Always trust software from Sigma Design Inc.” and click “Install”
2.1.5 Complete Setup Wizard, Click "Finish"
