3
6
Caution: Lamp unit may be hot! Wait until unit is cool
Use the same type of the light bulb!
To replace LED lamp
Make sure all control switches are off, and the cooker hood is unplugged.
Pls follow instructions below:
Warning:
Make sure the bulb is cool before you touching
1.Take out the filters, and cut off the wire connection.
2.Press the spring according to the arrow direction,
to take off the bulb cup.
3.Replace the old bulb with a new
12V d.c2W
4.Put on the new bulb in reverse
direction, then fix the spring and wires.
OPERATION INSTRUCTIONS
2. Install the cooker hood right above the hob.The recommended distance
between the hob and the lower edge of the cooker hood is minimum
350mm and maximum 400mm. (Fig. 2)
3. In order to get the optimum performance, do not elongate the exhaust
pipe too long, avoid over-bending of exhaust. Ensure the
connection is airproof. (Fig. 3)
4. After hanging the unit on the wall, ensure the hood is level and vertically
straight.(Fig. 4)
5. The air outlet must not be connected to chimney flues or combustion gas
ducts. The air outlet must be under no circumstances, be connected to
ventilation ducts in which fuel-burning appliances are installed.
INSTALLATION REQUIREMENTS
1. Do not install the cooker hood where there are many doors or windows
in order to avoid to affecting the exhaust efficiency of the hood caused
by air convection. (Fig. 1)
3
5
0
~
4
0
0
m
m
Fig.1
Fig.2
Fig.3
LEVEL
Fig.4
LEAN
3. Clean the filter once a week or according to usage. Press the buckle of
the filter slightly, take off the filter and put it into warm soapy water
using mild detergent, lightly brush the filter with soft brush. Place the
filter back after it is dry.
4. Clean the motor fan and other internal parts twice a year or according to
usage by a QUALIFIED PERSON.
5. DO NOT clean motor with water or other liquid.
MAINTENANCE
1. Use only mild soap or detergent solutions to clean the cooker hood surface.
Dry surfaces using soft cloth.
2. Use a stainless steel cleaning solution to bring the glow back onto a
stainless steel finish.
Caution: Never put your hand into the area housing
while the fan is operating.
For the optimal level of operation, clean the cooker
hood surface, fan and aluminum filter regularly.
A
B
C
D
E
Touch A, when the hood is working, it will prolong working 3 minutes;
Touch again, the hood will return to normal working conditions.
Touch B, turn on the lights, press it again, turn off the lights.
Touch C, the fan runs at LOW speed.
Touch D, the fan runs at HIGH speed.
Touch E, when the hood is working, it will turn off immediately.
Содержание MWM-DIAMOND-90SS
Страница 1: ...COOKER HOOD MWM DIAMOND 90SS...
