10
Stop Valve knob
position during off
Posisi injap hentian
ketika dipadamkan
Turn on stop valve (anti - clockwise).
Hidupkan injap hentian (arah lawan jam).
1
Make sure water flow starts after stop valve
had been turned on.
Pastikan pancuran air bermula selepas injap hentian
dihidupkan.
2
Switch on the main power supply and green “POWER” LED
would light up.
Hidupkan bekalan kuasa utama, dan “POWER” LED hijau
akan bernyala.
3
Temperature
control knob
during off
Posisi tombol
pengawal suhu
ketika dipadamkan
Turn on temperature control knob and red “HEATER” LED
would light up.
Pusing tombol pengawal suhu dan “HEATER” LED merah
akan bernyala.
4
4. OPERATION PROCEDURES / TEST RUN OF HEATER
TATACARA OPERASI / PENGUJIAN PEMANAS