Calories
Hold the left button for 3 seconds to reset
the calorie data.
Fat burned
Fat burnt is measured in grams. Hold the left
button for 3 seconds to reset the data.
Scan
Press the right button to enter SCAN mode.
The trip distance, maximum speed, average
speed and trip timer will be automatically
displayed every 4 seconds.
Freeze Frame Memory
Freeze Frame Memory can lock the display at the
end of a ride segment. Press the left button to
enter the mode. TM, DST, and AVS, which will be
flashing, can be read at a later time by pressing
the right button. To reset the memory, press the
left button; the display will stop flashing.
This function is particularly useful for example
after a competition or when not having the time
to analyze the data right away.
Note: Computer must be in either DST, MXS,
AVS, or TM mode for this function to work.
Start the computer
Press any button to wake up the computer and display before
cycling.
Auto power off
In order to save battery, the unit will go to sleep if no input is
received for 5 minutes.
Computer reset
EL backlight
To turn on the EL backlight you have two alternatives:
a) By holding the right button for 2 seconds, the EL light will
be turned on for 8 seconds. The computer will then go to scan
mode with trip distance, maximum speed, average speed and
trip timer displayed.
b) Press the left button to turn on the EL light for 4 seconds. The
computer will go to the freeze frame memory mode as well.
Error
Problem/solution
Inaccurate maximum
speed reading
Unknown atmospheric or RF interference
No speedometer
reading
Improper magnet/ transmitter alignment. Check
the battery and make sure it is inserted correctly.
The display is black Temperature is too hot, or display has been
exposed to direct sunlight for too long
No trip distance
reading alignment
Check for correct sensor/ magnet alignment and
check the battery and make sure it is inserted
correctly.
Display shows
irregular figures
Take out the computer battery and insert it again.
The computer will reset by either of the following cases.
a) Battery Change
b) Holding both left and right button for 3 seconds will reset the
computer.
Manual wake-up
Wake up the computer by pressing any button.
Auto wake-up
You can wake up the computer by simply riding the bike without
pressing any button. If you bike within 2 hours after sleep, the
computer will wake up within 10 second. If it has been more
than 2 hours after sleep, it will wake up within 1 minute.
ENGLISH
ENGLISH
11
10
