Selection of kilometres or mile
After the wheel size is set, the following setting is the selection
of kilometers or miles as the measurement for distance. Press
the right button to choose between kilometer (km) or Mile (m)
and press the left button to confirm.
Km or m selection
Age and weight
Set your age and weight.
Weight will be put in kg
or pound if km or mile is
selected, respectively.
Service program
The bike computer has a service program to remind you to
replace parts or lubricate the chains after a preset distance is
reached. Right after the km/mile selection is done, the preset
total distance of 600km (or miles) will flash. Press the right
button to select between 200, 400, 600 & 800 km (or miles) and
press left button to confirm your choice. For example, if 600 km
is set, the spanner (
) will start to flash whenever the total
distance is reached; 600 / 1200 / 1800 etc. Press the left button to
stop the spanner (
) from flashing.
Clock and time setting
Press the right button to enter the scan interface and press it
again to enter the time mode. Press and hold the left button for
3 seconds to enter the clock settings where you can choose
12 / 24-hour format. Press the right button to select and the left
button to confirm your choice. Continue with entering the hour
and minute settings.
Set the service program
Set the wheel size
Set the wheel size, factor C, into the computer by multiply the
wheel diameter in millimeter by 3.1416. For convenience, please
refer to the chart below.
ENGLISH
ENGLISH
7
6
