Rubicon Netgate SG-2100, Руководство пользователя

Страница: 33 / 50

Security Gateway Manual SG-2100
Fig. 2: An example of using PuTTY in Linux.
GNU screen
In many cases
screen
may be invoked simply by using the proper command line, where
<console-port>
is the
console port that was located above.
sudo screen <console-port> 115200
If portions of the text are unreadable but appear to be properly formatted, the most likely culprit is a character encoding
mismatch in the terminal. Adding the
-U
parameter to the
screen
command line arguments forces it to use UTF-8
for character encoding:
sudo screen -U <console-port> 115200
7.4.2 Terminal Settings
The settings to use within the terminal program are:
Speed
115200 baud, the speed of the BIOS
Data bits 8
Parity none
Stop bits 1
Flow Control Off or XON/OFF . Hardware flow control (RTS/CTS) must be disabled .
© Copyright 2020 Rubicon Communications LLC 31