Rubicon netgate SG-1100, Руководство пользователя, Страница: 26 / 58

Security Gateway Manual SG-1100
Fig. 2: An example of using PuTTY in Linux.
Terminal Settings
The settings to use within the terminal program are:
Speed 115200 baud, the speed of the BIOS
Data bits
8
Parity
none
Stop bits 1
Flow Control Off or XON/OFF . Hardware flow control (RTS/CTS) must be disabled .
2.1.5 Troubleshooting
No Serial Output
If there is no output at all, check the following items:
• Ensure the cable is correctly attached and fully inserted
• Ensure the terminal program is using the correct port
• Ensure the terminal program is configured for the correct speed. The default BIOS speed is 115200 , and many
other modern operating systems use that speed as well. Some older operating systems or custom configurations
may use slower speeds such as
9600 or 38400 .
• Ensure the operating system is configured for the proper console (e.g.
ttyS1
in Linux). Consult the various
operating install guides on this site for further information.
© Copyright 2021 Rubicon Communications LLC 24