14
15
ENGLISH
1
Disconnect power cord from outlet.
Release latches. Remove powerhead.
Reinstall inner tank.
Remove inner tank and empty.
2
2
1
A
Reinstall powerhead. Fasten latches. (Vacuum cleaner is now
ready for use.)
3
B
4
B
5
1
A
Emptying Dry Tank
Wet Mode Operation
1
Slide wet/dry selector right to expose wet port.
Insert hose into “wet tank inlet” and turn clockwise to lock.
Plug power cord into outlet. Turn power switch on. (Vacuum
cleaner is now ready for use.) Once complete, turn power
switch off and unplug power cord from outlet.
Attach bent and/or straight wand and desired accessory.
1
2
2
U
For more capacity in wet mode, the inner tank can be
removed. Release latches and remove powerhead and inner
tank. Turn powerhead over.
3
K
I
U
4
1
2
4
1
3
2
A
B
1
2
4
3
Y
W
X
Remove HEPA filter/HEPA foam sleeve. Replace with large
foam filter. Reinstall powerhead. Fasten latches. (Vacuum
cleaner is now ready for use.)
Optional Increased Capacity
Note:
When using single tank configuration, it is not recommended to alternate between wet and dry modes.
