Ensure
Front Roof (J)
is positioned against the back wall tongues.
From outside the shed, install one
Screw (AA)
at each corner.
Hold the edge of the roof down firmly at the corners while installing each screw.
Install remaining screws into remaining locations of back walls.
c.
AA
(8)
J
1.
2.
Helpful Hint:
Installation is easier using a magnetic bit or starting
screws with a manual screwdriver to get seated. Pilot holes also may
be drilled using 1/8" bit.
Slightly raise front edge of roof enough to allow positioning of
Roof Brace (RB)
onto the side walls as shown.
Lower the roof onto the walls and align
Roof Brace (RB)
into pocket in
Front Roof (J).
b.
J
RB
10
