Fig.9
13.
Monitor beep check box configures whether a beep will be played once every 3 seconds in the earpiece of a handset
operating on the repeater. If this feature is enabled, it will not be possible to transmit or receive fax or modem. When
connecting several repeaters in serial a beep from each repeater will be audible. Fig.10
Fig.10
14.
Press the “Save” button in the “REPEATER” window to save the changes. Fig.11
Fig.11
15.
Quit the RTX4002 Repeater config program by pressing the “Quit” button. Fig.12
Fig.12
16.
Now you have to register the second repeater to your base station, as the first repeater was registered. After the
registration of the second repeater is completed, you can disconnect the power and move the repeaters to the selected
location (disconnecting the power will not delete the registration)
