RTS OMNEO OEI-2, Руководство пользователя, Страница: 30 / 40

30 Configuration OEI-2
Bosch Security Systems, Inc. Technical Manual F.01U.287.527 Rev. 01
IMPORTANT: For instructions on changing the IP Address of the OEI-2 device from a specific keypanel, refer to the
appropriate keypanel manual.
Change the IP Address of the OEI-2 device from an RP-1000
NOTE: Only OMNEO menu enabled devices can modify the IP Address of an OEI-2 device.
To select the fixed addressing for the OMNEO device , do the following:
1.
Using the arrow keys, select OMNEO Setup .
2.
Tap PGM .
Device Name appears.
3.
Using the arrow keys, scroll to DHCP
4.
Tap PGM .
Disabled and Enabled appear in the display.
5.
Using the arrow keys, select Fixed IP .
6.
Tap PGM .
The addressing type is set.
To configure the IP Parameters for the OMNEO device , do the following:
1.
Using the arrow keys, select OMNEO Setup .
2.
Tap PGM .
Device Name, DHCP, and IP Parameters appear in the display.
3.
Using the arrow keys, scroll to IP Parameters .
4.
Tap PGM .
IP Address appears in the keypanel display.
5.
Tap PGM .
The IP Address octet appears in the keypanel display with the first octet blinking.
6.
Using the keypad, enter the IP Address .
Use the PGM key as the dots between octets.
7.
When finished entering the IP Address, tap PGM .
Netmask appears in the keypanel display.
8.
Tap PGM .
The Netmask octet appears in the keypanel display with the first octet blinking.
9.
Using the keypad, enter the Netmask , if necessary.
Use the PGM key as the dots between octets .
10.
When finished entering the Netmask, tap PGM .
Gateway appears in the keypanel display .
11.
Using the keypad, enter the Gateway , if necessary.
Use the PGM key as the dots between octets .
12.
When finished entering the Gateway, tap PGM .
The DNS Srv 1 appears in the keypanel display .
13.
Using the keypad, enter the DNS Svr 1 address , if necessary.
Use the PGM key as the dots between octets .
14.
When finished entering the DNS Svr 1 address, tap PGM .
Domain appears in the keypanel display.
15.
Tap PGM .
The Domain name appears in the keypanel display with the first character blinking.
16.
Using the arrows, scroll to the to the first character of the device name desired.