RTS BP-6000, Техническое руководство

Страница: 22 / 32

22 Initial Setup and Configuration Universal Beltpack – BP-6000
Mic Gain Menu
The Mic Gain menu is used to set the mic gain for the beltpack. Mic gain adjusts the audio level being
sent out on the line.
Available options for this menu are 1, 2, 3, 4, and 5 .
1 represents the lowest gain setting, while 5 represents the highest gain setting.
The default for this menu is 4 .
A mic gain setting of 4 sets the output to 0dBu, given a -45dBu nominal input on a dynamic microphone.
To configure the mic gain , do the following:
1.
While in the program menu, navigate to Mic Gain .
[voice prompt] “Mic Gain”.
2.
Press the TALK button to navigate to the desired gain level.
[voice prompt] “<gain level X>”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 19).
Sidetone Adjust Menu
The Sidetone Adjust menu is used to set the level of sidetone heard in the user’s headphones. Sidetone is
the amount of the user’s own voice, which is fed back (with minimal delay) into the user’s headset
speakers. It provides confirmation to the user of an active network and allows users to better control their
level of speaking.
Available options for this menu are 1, 2, 3, 4, and 5 .
1 represents the lowest sidetone level, while 5 represents the loudest sidetone level.
The default for this menu is 1 .
To configure the sidetone adjust , do the following:
1.
While in the program menu, navigate to Sidetone Adjust .
[voice prompt] “Sidetone Adjust”.
2.
Press the TALK button to navigate to the desired sidetone level.
[voice prompt] “<sidetone level X>”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 19).