RTS ARP-32, Руководство пользователя

Страница: 5 / 20

3
CHAPTER 1
Introduction
Introduction
This manual describes the installation, programming, and operating procedures for the RTS Model ARP-32 Audio Routing
Panel. The ARP-32 provides the user with the ability to assign one of up to 16 crosspoints and/or up to 16 different
crosspoints. Through the use of up to three (3) expansion panels, allowing for a total of 64 input keys and 63 output keys, in
addition to the scroll key.
The sum total of ARPs and LCP-102s cannot exceed 15 in a system. The ARP-32 works with ADAM intercom matrix system.
The ARP-32’s key assignments and setup page assignments are stored by the ADAM MCII-e controller, and downloaded to
the panel when it powers up. Changes made at the ARP-32 are automatically saved by the MCII-e. Changes can also be made
using AZedit. ARP firmware version 0.0.1 and later allows configuration of crosspoint connections.
Features
• Firmware Requirements
• ARP-32 version 0.0.1 or later
• ADAM MCII-e version 1.4.0 or later
• AZedit version 3.2 or later
• Single key activation to display audio paths that are forced to or from a particular port, as well as any crosspoint inhibits.
By pressing one input key and one output key, the user can toggle the force status of a single crosspoint.
• Uses AZedit’s Crosspoint screen as a graphical interface for the user to force and inhibit configured ports.
• The ARP-32 supports up to a maximum of three expansion panels, allowing a total of 64 input keys and 63 output keys, in
addition to a scroll key.