RTS ARP-32, Руководство пользователя

Страница: 10 / 20

Configuration and Operation
8
Connections
The ARP-32 connects to the UIO-256/PAP port, J3 on an ADAM system. The baud rate, as with all UIO-256, PAP, and LCP-
102 devices, can be either 9600 baud or 76.8 K baud.
A cable must be made to connect the ARP-32 to the system.
Key Configuration
The ARP-32’s key assignments and setup page assignments are stored by the ADAM MCII-e controller, and downloaded to
the panel when it powers up. Changes made at the ARP-32 are automatically saved by the MCII-e. Changes can also be made
using AZedit.
FIGURE 2.
ARP-32 D-Sub Cable Diagram
FIGURE 3.
ARP-32 RJ12 Cable Diagram