RTS ADAM-CSedit, Руководство пользователя

Страница: 25 / 64

4. The “self” column (Slf) is used to also isolate the key-
panel operator during ISO activation. This insures
that the keypanel operator is not disturbed during a
critical ISO operation. Use the SPACE BAR or click
with a mouse to place or remove a check mark in this
column.
5. To designate the port that will be isolated during ISO ac-
tivation, move the cursor to the Output column and
enter the Alpha name of the desired port (or select
the desired Alpha from the pick list at the right side
of the screen).
6. When you are done setting up an ISO, press the ES-
CAPE key to return to the menu bar. (Or, click on
any selectable item with the right button on a mouse.)
7. Assign the ISO to a key on a keypanel as described un-
der "Keypanel Setup", starting on page 2-15.
8. Remember to save your changes and send them to the
intercom system when finished. (See "Activating a
New File or Sending Changes", page 1-4.)
2-14 CSedit User Manual