RTRMAX RTM9604, Оригинальное руководство пользователя

Страница: 4 / 15

Be sure to fully charge the battery prior to operation. Fill the holding tank with prepared liquid through
the screen and screw on cover. Inspect full holding tank for any leakage. Turn on power switch and
squeeze spray lever to start spraying. There are four nozzles to choose from.
• FLAT FAN NOZZLE sprays a pattern that is a fan configuration in one axis and flat in the other
axis.
• 4-Hole Adjustable NOZZLE sprays a light misty cone pattern or a full saturated spray pattern
depending on the adjustment of the nozzle.
• DOUBLE Conical Spray NOZZLE sprays a dual cone shapes with fluid flow throughout the 2 cone
angles.
1. Charge the battery until the charger’s Green/“Charged” light comes on indicating that the battery is
fully charged.
2. Never operate the sprayer without liquid in it or it may damage the diaphragm.
3. In case of humming sound from inside the sprayer or poor atomization after long time use, recharge
the battery.
- Battery must be charged at least 3 hours. Keep charger in a dry, well ventilated safe place.
4. Test sprayer with water prior to use to assure that no leakage occurs and that proper atomization
occurs.
CAUTION
• Always wear a mask and gloves when operating The Battery Garden Sprayer. Always remain fully
clothed to avoid skin contact with overspray.
• Never spray pesticides against the wind. Never spray at humans, animals or food.
• Never operate this sprayer in temperatures exceeding 44ºC or lower than -8ºC. Always comply with
safety instructions of liquid you are spraying.
• Never use sprayer for strong acid or flammable liquids. Never use high persistent and toxic
pesticides on vegetables, fruit trees, herbs or medicinal plants.
• Always clean unit thoroughly after each use to avoid corrosion, clogging and contamination of future
spray liquids. Clean exterior by scrubbing with wet cloth. Clean interior by filling holding tank with a
small amount of water and shaking before turning on power to discharge. Never immerse machine in
water for any reason.
• Switch off power before storage.
• Do not use sprayer near fire.
• Never use sprayer for dry ingredients, use only liquids.
• Unauthorized removal of the charger’s housing will void warranty.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Motor fails to start
after being powered

Power cable disconnected.

Battery is not charged.

Damaged power switch.

Dismantle base to
reconnect cables

Charge battery.