RTMOTION LATITUDE MDR, Руководство пользователя

Страница: 3 / 36

2 Quick Start Guide – Receiver MK3.1
Initial Setup
1. Plug 12-17V into the RECEIVER's “PWR” port.
The ideal source is a ~14.8V battery (i.e. 4S Lithium cells).
If the voltage is over ~17.5V or polarity is reversed, the RECEIVER will block the dangerous voltage and not
start.
2. Affix one or more MOTORS to the rods/lens.
Each motor is factory-set to a certain class (Focus, Iris, Zoom) and labelled accordingly. You can re-assign motor
classes via the menu.
3. Plug the MOTOR(s) into the RECEIVER unit.
Plug the Motor(s) into
​
any
​
motor port, the Motors will begin calibrating.
4. Put a Canon LP-E6 battery in the CONTROLLER and hold down the PWR button.
5. On the controller go to MENU, WIRELESS, FIND RECEIVER
Camera Run/Stop
1. Connect the appropriate Run/Stop cable from the CAM port on the Receiver to
your Camera.
2. Enter the Controller’s MENU, Select CAMERA, then select which camera you have
connected.
3. You can now Run/Stop the camera with the REC button.