RTMOTION LATITUDE MDR, Руководство пользователя

Страница: 13 / 36

AUX Port
The AUX port is a multi-use port, supporting the use of Analogue controllers (Knob/pot, Rocker,
Force Joystick), Wired-Mode operation (connect the Controller to the Receiver directly, to bypass
the wireless), as well as TTL-level serial communication.
Available Modes of Operation
The following functions are supported by the AUX port. The AUX port does not need to be
manually configured as it will automatically detect which cable is plugged in.
Slave Controllers (aka, Analogue Controllers)
Slave controllers (thumbwheel, rocker, etc.) directly connect to the AUX port, and can be
configured to control any available axis (Focus, Iris, etc.). Run/Stop triggering is also supported,
provided that you have an appropriate cable connected to your camera from a CAM port.
Wired Mode (bypass Wireless)
Devices which have a 5-pin WIRED MODE socket (such as a Controller MK3.1) can connect to the
AUX port via a suitable wired-mode cable. The Status LED on both devices will go BLUE to indicate
that a connection has been made, and that Wireless transmission is disabled.
When Wired Mode cable is unplugged (after a successful connection) the receiver will auto detect
the Controller via RF changing frequency if necessary.
Setting the AUX PORT's Mode
To configure the AUX PORT manually, use the CONTROLLER. Enter the MENU, then select AUX.