Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
RTSO-6003 Product Manual V1.0
13
3.3 usage
a)
Ensure that all external system voltages are switched off
b)
Install the Jetson Nano/Xavier NX/TX2 NX core module on the 260 Pin SO-DImm connector.
During the installation, please pay attention to the alignment between the connectors, apply force
evenly, and install the fixing screws.
c)
Install necessary external cables. (e.g., the display cable to the HDMI display, the power input cable
to power the system, the USB cable to link the keyboard and mouse...)
d)
Connect the power cord to the power supply.
e)
RTSO-6003 adopts the automatic/manual power-on design. Power is turned on and the system starts
to work.
f)
For the system without protective enclosure, please avoid moving the whole system after the system
is powered on. It is strictly prohibited to use the body to touch the circuit board and its electronic
components.
3.4 Recovery MODE
Jetson Nano/Xavier NX/TX2 NX core module can work in normal mode and Recovery mode, under
which file system update, kernel update, Boot Loader update, BCT update and other operations can be
carried out.
The steps to enter the Recovery mode are as follows:
a)
Turn off the power supply to the system.
b)
Use USB cable to connect RTSO-6003's OTG-USB port (P17) with Jetson to develop host USB
port.
c)
Press and hold the RECOVERY button to supply power to the system. The power supply should be
maintained for more than 3 seconds, and then release the RECOVERY button.
d)
The system enters the Recovery mode, and subsequent operations can be carried out at this point.
