RTI MCX-2F, Руководство по эксплуатации

Страница: 18 / 21

Page 17
Do not leave the MCX-2F unattended while emptying the waste tank.
The pump will be destroyed if allowed to run for more than one
minute after waste tank is empty.
Bulk Waste Container
& O VER
FLO
W
FILL
RAD
IATO
R
TES
T EMP
TY W
AST E TA
NK
& O
VER
FLO
W
LOW
ER R
ADIA
TO R
Black Hose
SYS TEM
PR
ESS
UR E
LOW
ER
RAD
IATO
R
& O
VER
FLO
W
EM
PTY W
AST
E TA
NK
EXC
HAN
GE C
OOL
ANT
OFF
OFF
OFF
FILL
RA
DIAT OR &
OV
ER
FLO
W
EXC HA
NGE
CO
OLA NT O
R
SYS
TEM
VA CUU
M
Green Hose
EXC
HAN
GE C
OO
LAN
T O
R
FILL
RA
DIA
TOR
& O
VER
FLO
W
LOW
ER R
ADIA
TOR
& O
VER
FLO
W EM
PTY
WA
STE
TAN
K
SYS
TEM
VAC
UUM
OFF
OFF
FILL
RA
DIA
TOR
& O
VER
FLO
W
EXC
HAN
GE C
OOL
ANT
TES
T
SYS
TEM
PR
ESS
URE
EM
PTY
WA
STE
TAN
K
OFF
& O
VER
FLO
W
LOW
ER R
ADIA
TOR
EMPTYING THE WASTE TANK
The Waste Tank can be emptied two different ways.
A. The Waste Tank can be removed from the MCX-2F and transported to the area
where it is to be emptied. A quick connect coupler is installed on the black hose
to make this disconnection quick and clean.
B. The MCX-2F can be used to pump the waste coolant directly from the Waste
Tank into another waste collection tank. A 12 volt battery will be required to
power the MCX-2F.
1. Install the Wand on the black hose.
2. Turn both valves on the front of the MCX-2F to EXCHANGE.
3. Turn the control valve to EMPTY WASTE TANK.
4. Press the top of the EMPTY WASTE TANK selector switch to start the pump.
5. Hold the Wand over the Bulk Waste Container and open the valve.
6. Waste coolant will be pumped directly from the MCX-2F Waste Tank into the
Bulk Waste Container.
7.
Close the valve on the Wand when done.
8. Press the bottom of the EMPTY WASTE TANK selector switch to stop the
pump.