rtd cpuModules CMA24BT Скачать руководство пользователя страница 76

Страница: 76 / 116

66 CMA24BT cpuModule

BDM-610000087 Rev A

SATA Controller Configuration

The CMA24BT has two SATA links. One SATA link resides on the top PCIe/104 Type 2 connector (

CN1

and the second SATA link connects to the onboard SATA storage. Both may be enabled or disabled through

the BIOS setup.

SATA Port Mappings, by Connector

Table 39 shows the SATA port configuration of the CMA24BT cpuModule:

Onboard SATA Storage

The cpuModule was designed to be used in embedded computing applications. In such environments,

rotating media like hard disks and floppy disks are not very desirable. It is possible to eliminate rotating

storage devices by placing your operating system and application software into the cpuModule's onboard

SATA storage.
The onboard SATA storage supports write protection. Write protection is disabled by default and can be

enabled with a menu option in the BIOS setup.

SATA Links on the PCIe/104 Type Connectors

Both SATA links are connected to the Intel E3800 CPU’s SATA controller which can be configured for

either ACHI or IDE mode through the BIOS . However, the operating system must support the selected

mode for the device to operate correctly. The default configuration for the controller is ACHI mode.
When in IDE mode, the user has an additional option to change the IDE emulation mode to Native Mode

or Legacy Mode.When the SATA controller is configured for IDE mode, Native Mode is the default IDE

emulation mode.

Native IDE Mode

Native Mode allows more flexibility than Legacy Mode, as it permits the system to modify the resources

used by the SATA controller. When in Native Mode, the SATA controller only requires a single IRQ. Unlike

Legacy Mode, this IRQ may be changed by the user or the operating system for better distribution of the

system IRQs. When IRQs in the system are more evenly distributed, interrupt latency is minimized. The

base address of the controller may also be modified.

Legacy IDE Mode

When in this mode, the controller will be fixed to use two interrupts: IRQs 14 and 15. Similarly, the I/O

address of the controller will be fixed in the system. When in Legacy Mode, only a primary and secondary

channel may be used in the system.

Table 39 SATA Port Layout

Designator

Physical Position, Index

E3800 Port

Index

Channel Assignment

(Legacy IDE Mode)

CN1

SATA PCIe link 0

Primary Master

n/a

Onboard SATA storage

Primary Slave

Содержание cpuModules CMA24BT





















































































































Результаты поиска

Содержание cpuModules CMA24BT

Отзывы:

Похожие инструкции для cpuModules CMA24BT

Бренды по названию

Популярные бренды

rtd cpuModules CMA24BT, Руководство пользователя

Результаты поиска

Содержание cpuModules CMA24BT

Отзывы:

Похожие инструкции для cpuModules CMA24BT

Бренды по названию

Популярные бренды