rtd cpuModule CMX47786HX, Руководство пользователя

Страница: 24 / 108

CMX47786HX RTD Embedded Technologies, Inc.
16
Connecting to the PC/104 Bus
The PC/104 bus connectors of the cpuModule are simply plugged onto a PC/104 stack to connect to
other devices.
We recommend you follow the procedure below to ensure that stacking of the modules does not
damage connectors or electronics.
• Turn off power to the PC/104 system or stack.
• Select and install standoffs to properly position the cpuModule on the PC/104 stack.
• Touch a grounded metal part of the rack to discharge any buildup of static electricity.
• Remove the cpuModule from its anti-static bag.
• Check that keying pins in the bus connector are properly positioned.
• Check the stacking order; make sure an XT bus card will not be placed between two
AT bus cards or it will interrupt the AT bus signals.
• Hold the cpuModule by its edges and orient it so the bus connector pins line up with
the matching connector on the stack.
• Gently and evenly press the cpuModule onto the PC/104 stack.
WARNING! Do not force the module onto the stack! Wiggling the mod-
ule or applying too much pressure may damage it. If the
module does not readily press into place, remove it, check
for bent pins or out-of-place keying pins, and try again.