rtd CM17320HR Скачать руководство пользователя страница 26

 

Page 26 of 26 

Limited Warranty 

 

RTD Embedded Technologies, Inc. warrants the hardware and software products it manufactures 

and  produces  to  be  free  from  defects  in materials  and  workmanship  for  one  year  following  the 

date of shipment from RTD EMBEDDED TECHNOLOGIES, INC. This warranty is limited to the 

original purchaser of product and is not transferable. 

During the one year warranty period, RTD EMBEDDED TECHNOLOGIES will repair or replace, 

at its option, any defective products or parts at no additional charge, provided that the product is 

returned,  shipping  prepaid,  to  RTD  EMBEDDED  TECHNOLOGIES.  All  replaced  parts  and 

products  become  the  property  of  RTD  EMBEDDED  TECHNOLOGIES.  Before  returning  any 

product for repair, customers are required to contact the factory for an RMA number. 

THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY  PRODUCTS WHICH HAVE  BEEN 

DAMAGED  AS  A  RESULT  OF  ACCIDENT,  MISUSE,  ABUSE  (such  as:  use  of  incorrect  input 

voltages,  improper  or  insufficient  ventilation,  failure  to  follow  the  operating  instructions  that  are 

provided  by  RTD  EMBEDDED  TECHNOLOGIES,  "acts  of  God"  or  other  contingencies  beyond 

the  control  of  RTD  EMBEDDED  TECHNOLOGIES),  OR  AS  A  RESULT  OF  SERVICE  OR 

MODIFICATION BY ANYONE OTHER THAN RTD EMBEDDED TECHNOLOGIES. EXCEPT AS 

EXPRESSLY  SET  FORTH  ABOVE,  NO  OTHER  WARRANTIES  ARE  EXPRESSED  OR 

IMPLIED,  INCLUDING,  BUT  NOT  LIMITED  TO,  ANY  IMPLIED  WARRANTIES  OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND RTD EMBEDDED 

TECHNOLOGIES  EXPRESSLY  DISCLAIMS  ALL  WARRANTIES  NOT  STATED  HEREIN.  ALL 

IMPLIED  WARRANTIES,  INCLUDING  IMPLIED  WARRANTIES  FOR  MECHANTABILITY  AND 

FITNESS  FOR  A  PARTICULAR  PURPOSE,  ARE  LIMITED  TO  THE  DURATION  OF  THIS 

WARRANTY.  IN  THE  EVENT  THE  PRODUCT  IS  NOT  FREE  FROM  DEFECTS  AS 

WARRANTED  ABOVE,  THE  PURCHASER'S  SOLE  REMEDY  SHALL  BE  REPAIR  OR 

REPLACEMENT  AS  PROVIDED  ABOVE.  UNDER  NO  CIRCUMSTANCES  WILL  RTD 

EMBEDDED  TECHNOLOGIES  BE  LIABLE  TO  THE  PURCHASER  OR  ANY  USER  FOR  ANY 

DAMAGES,  INCLUDING  ANY  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES,  EXPENSES, 

LOST  PROFITS,  LOST  SAVINGS,  OR  OTHER  DAMAGES  ARISING  OUT  OF  THE  USE  OR 

INABILITY TO USE THE PRODUCT. 

SOME  STATES  DO  NOT  ALLOW  THE  EXCLUSION  OR  LIMITATION  OF  INCIDENTAL  OR 

CONSEQUENTIAL DAMAGES FOR CONSUMER  PRODUCTS AND SOME STATES DO NOT 

ALLOW  LIMITATIONS  ON  HOW  LONG  AN  IMPLIED  WARRANTY  LASTS,  SO  THE  ABOVE 

LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. 

THIS  WARRANTY  GIVES  YOU  SPECIFIC  LEGAL  RIGHTS,  AND  YOU  MAY  ALSO  HAVE 

OTHER RIGHTS WHICH VARY FROM STATE TO STATE. 

 

 

Содержание CM17320HR



























Отзывы: