Network and Hardware Configuration
The Network and Hardware Configuration area is where you assign a description, change the IP
Settings and serial port settings.
Network Configuration
1)
From the navigation menu, select
Network and Hardware
under Configuration.
2)
Enter a User Description to help identify the router.
3)
Enter IP Address, Subnet, Default Gateway, and DNS information.
NOTE:
Changes can only be made on the webpage to the IP Address, Subnet, Default Gateway,
and DNS Gateway when the IP Settings parameter is set to “Use the Following IP Address.”
4)
Once you are done configuring the Description and the Network Settings, click the
Save
Parameters
button.
If you are changing the IP Address of the router, the change will not take effect
until the unit has been rebooted. After reboot, you must enter the new IP
Address into your browser to access the configuration screens.
It is recommended to leave the DNS Gateway set to 0.0.0.0 and the Ethernet Link as
Auto-Negotiate.
Real Time Automation, Inc.
11
1-800-249-1612
