Save and Replace Configuration using SD Card
This function saves the gateway’s configuration to an SD Card. If the SD card is placed in another unit,
the configuration on the SD card will automatically populate the gateway on power up.
This SD Card replaces every configurable field in the gateway,
INCLUDING
IP Address, Subnet Mask, and
Default Gateway.
Data Transfer To/From SD Card
Data is written
to
the SD Card if no current configuration is found on the SD card and when a
configuration change is saved.
Data is written
from
the SD Card upon power up. If the SD Card contains a configuration that differs in
any way from the configuration already in the gateway the configuration from the SD card will be
applied.
NOTE
: When data is being written from the SD Card to the gateway, it will take up to 30 seconds for the
data transfer to be completed. During this time, the gateway cannot be accessed via the webpage.
Using IP Setup with SD Card
When an SD Card is present and an IP Address is modified through IP Setup, a popup will appear after
the Set
button is pressed. This is intended as an extra precaution to ensure that the IP Address should
be modified from what is currently stored in the SD Card.
1.
Enter a UserName of RTA.
2.
Enter a Password of RTA.
3.
Press OK.
4.
This will then update the IP Address of the gateway and the SD Card with what was set through
IPSetup.
Real Time Automation, Inc.
28
1-800-249-1612
