P.7
RTA-3788
P.7
Assemble the auxiliary panel (7) to the unit using:
- Screws D to assemble it to the back panel (5) from behind the unit;
- Screws A to assemble it to the vertical tubes (6) from underneath.
Use screws E to assemble the support tubes (9) to the glass tabletop (13) as shown.
First place the support tubes (8) over
the holes of the structures (1L) and
(1R), then carefully and with the
help of another person, place the
glass tabletop (13) over the tubes,
and finally secure the top using
screws C from underneath as shown.
STEP 6
Screws:
A
6x35mm
2
pcs
D
6x50mm
2
pcs
STEP 7
Screws:
E
6x20mm
2
pcs
The panel has insert nuts for the screws.
If alignment is needed, use a flat head
screwdriver and turn the nut to align it
so it can properly receive the screw.
If the holes don’t align with tubes
(6), review steps 2 and 5 for the
correct assembly and orientation
of the parts.
STEP 8
Screws:
C
6x85mm
4
pcs
MIGHT REQUIERE
OF 2 PERSONS
