P.6
RTA-3788
P.6
Use screws H to assemble the lower panel (2) to the structures (1L) and (1R) as shown.
Use screws and nuts B to assemble the back panel (5) to the main structures (1L), (1R) as
shown. Note that the screws enter from the outside of the structures.
Use screws D to assemble the vertical tubes (6) to the horizontal tube (4).
STEP 3
Screws:
H
6x65mm
4
pcs
STEP 4
Screws:
B
6x65mm
4
pcs
STEP 5
Screws:
D
6x50mm
2
pcs
The panel has insert nuts for the screws.
If alignment is needed, use a flat head
screwdriver and turn the nut to align it
so it can properly receive the screw.
If the holes don’t align, review
step 2 for the correct assembly
and orientation of the structures.
(This shows the parts
from step 3 viewed
from behind)
(F
ront
)
(This shows the parts
from step 4 viewed
from the front)
(F
ront
)
(F
ront
)
