VW2106 Vibrating Wire Readout Manual
RST Instruments Ltd.
Page 14
F
IGURE
4-2
R
EADINGS SCREEN
If a unit is connected, the readings screen will display the current sweep settings and
a reading from the VW instrument and its internal thermistor. The default units are B
units (f
2
x 10
-3
) and degrees Celsius. Units can be changed if desired (see section
4.2
S
TORING
R
EADINGS IN
M
EMORY
The VW2106 readout has 128k of internal memory, allowing it to store over 11,000
time-stamped readings.
The following instructions outline the steps required to store readings in the unit’s
memory.
1.
Using the up/down arrows, scroll to the
Store Data
screen and press
Enter
.
2.
Using the up/down arrows, scroll to the desired location and press
Enter
.
3.
Press
Enter
when prompted to store the reading (Figure 4-3).
F
IGURE
4-3
S
TORING A READING
4.
If the unit has more than once sensor, the unit will display both average readings
(in bold) and individual readings (Figure 4-4).
B: 1200 - 3550
9032.7
22.1
B
o
C
