VW2106 Vibrating Wire Readout Manual
RST Instruments Ltd.
Page 20
5.2
B
ATTERY
The VW2106 operates on 3 standard “AA” batteries. The battery terminal can be
found the left side of the readout unit (Figure 5-1).
F
IGURE
5-1
B
ATTERY COMPARTMENT
The following instructions detail the process for accessing the battery compartment
and installing batteries (Figure 5-2):
1.
Using a flat-head screwdriver, turn the cap on the battery cover one quarter turn
counterclockwise.
2.
Remove the cap.
3.
To replace the cap, ensure the notched on the cap align with the notches on the
compartment. Firmly press the cap into place and turn the cap one quarter turn to
the right.
CAUTION:
E
NSURE THE NOTCHES OF THE BATTERY COMPARTMENT COVER AND THE
BATTERY COMPARTMENT ITSELF ARE ALIGNED BEFORE REPLACING AND TIGHTENING
THE COMPARTMENT COVER TO PREVENT DAMAGING THE COVER
.
F
IGURE
5-2
B
ATTERY INSTALLATION
The status of the battery can be checked using the following steps:
