RST meteoscan 938PRO, Руководство по эксплуатации, Страница: 5 / 56

RST01937 meteostanciya
page 5
3. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the trans-
mitter.
4. Channel Number: the weather station support up to eight sensors, and includes three trans-
mitters. To set each channel number, change Dip Switches 1,2,3 as referenced in Figure 6.
5. Temperature unit of Measure: To change the sensor display units of measure (F o or C o ) change
Dip Switch 4, as referenced in Figure 5.
Pull down the button: Pull up the button:
6 . Insert two AA batteries
7 . Wait for seconds until temperature and humidity displayed on the LCD screen of sensors.
8 . Verify the correct channel number (CH) and temperature units of measure are on the display,
as shown in Figure 6.
(1) Temperature
(2) Temperature units ((
℉
or
℃
)
(3) Channel number
(4) Relative humidity
9. Close the battery door.
10. Repeat for the additional remote sensor, verifying
each remote is on a different channel.
Figure 5.
Figure 6
RST01938Manual 20.10.2017 13:20 Страница 5