RST meteoscan 938PRO, Руководство по эксплуатации, Страница: 24 / 56

page 24
RST01937 meteostanciya
4.2.1 Time, Date and Display Setup
Select Menu | Setup to set the time, date and display customization settings.
From this screen you can set the graph type on the weather station screen (temperature, humid-
ity, dew point or heat index), graph hours, time zone and daylight savings settings, time and date
format, temperature units of measure, archive interval, and display preferences (temperature,
humidity, dew point or heat index).
For details, reference below:
All the settings from the base unit is mirrored into the PC software, so once you have done your
setting on the base unit, then you don’t need to make any setting changes on the PC software.
However you can still easily make any setting changes you wanted from the PC and download
the changes into the base station (the setting change will be refreshed when next full minute ar-
rives on the base station).
4.2.2 Alarm Setting
Select Menu | Alarm to set the high
and low temperature and humidity
alarms for each of the 8 supported
channels.
This section is used to set the high
and low temperature and humidity
alarm for each of the 8 supported
channels. Once you made your
choice, choose Save to make the
setting effective. If you don’t want
to make any change, just press
Cancel and exit without change.
RST01938Manual 20.10.2017 13:20 Страница 24