RSS M-400 Скачать руководство пользователя страница 171

Страница: 171 / 253

171

User settings

The USER screen is used to create and edit user settings.

fig.ScrUserGuide.eps

Current user indication

This shows the current user name.

2.3.

User list

This lists the user settings saved in internal memory and in USB
memory.

The following items are shown.

In the USER screen, the function buttons perform the following
operations.

Accessing the USER screen

In the USER section, press [DISP].

fig.ScrUser.eps

Access the USER screen.

fig.ScrUser.eps

From the user list, select the desired user.

Press [F1 (CHANGE USER)].

If a password has been specified, the ENTER PASSWORD
popup will appear.

Creating and editing user

settings

USER screen

FILE NAME

Indicates the name of the user settings.

TIME

Indicates the date and time at which the settings
were last changed.

STATUS

If a password has been specified, the indication
PASSWORD appears here. In the case of a user
who has ADMIN privileges, ADMIN is indicated.

[F1 (CHANGE USER)]

Switches to the user settings
selected in the list.

p. 171

[F2 (CREATE USER)]

Creates a new user in USB
memory.

p. 173

[F3 (SAVE CURRENT)]

Saves the user settings tempo-
rarily held in internal memory
to USB memory.

p. 173

[F4 (DELETE USER)]

Deletes the user selected in the
USB MEMORY user list.

p. 174

[F5 (USER LEVEL)]

Edits the user level setting.

p. 176

[F6 (USER PREF)]

Edits the user preference set-
tings.

p. 177

[F7 (NAME EDIT)]

Accesses the NAME EDIT pop-
up, where you can edit the name
of the user settings selected in
the USB memory user list.

p. 174

[F8 (CHANGE Password)] Changes the password for the

user settings selected in the
list.

p. 175

Switching user settings

M-400_v15_e.book 171 ページ２００８年６月２０日　金曜日　午後４時５分

Содержание M-400






























































































































































































































































Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды

RSS M-400, Руководство пользователя

Результаты поиска

Содержание M-400

Отзывы:

Похожие инструкции для M-400

Бренды по названию

Популярные бренды