RSR DS406, Руководство пользователя

Страница: 9 / 12

1. Press the ON/OFF/SOURCE button repeatedly on the unit or press the BT button on the remote control to select BluT (Bluetooth)
mode. “ NO BT ” will show on the display if the unit is not paired to any Bluetooth device.
2 The system has entered pairing mode.
- Or press and hold the BF button on the main unit or the BF / PAIR button on the remote control to activate Bluetooth pairing, the display will
show " PAIR ".
3 Activate your Bluetooth device and select the search mode. “RSR DS406” will appear on your Bluetooth device.
4 Select “RSR DS406” in the pairing list. Display panel shows “ BLUET ” while the pairing succeeds.
5 Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can:
- Switch to another function on the unit.
- Disable the Bluetooth function from your device.
- Press and hold the " BF " button on the unit or the BF / PAIR on the remote control.
Tips:
- Enter "0000" for the password if necessary.
- If no other Bluetooth device pairs with this player in 2 minutes, the player will reconnect to the previous connection
- The player will also be disconnected when your device is moved beyond the operational range.
- If you want to reconnect your device to this player, place it within the operational range.
- If the device is moved beyond the operational range, when it is brought back, please check if the device is still connected to the player.
- If they are connected, display panel shows "
BLUET ".
- If the connection is lost, display panel shows " NO BT ". Follow the instructions above to pair your device to the player again.
Listen to Music from Bluetooth Device
• If the connected Bluetooth-enabled device support Advanced Audio Distribution Profile (A2DP), you can listen to the music stored on
that device through this player.
• If the device also supports Audio Video Remote Control Profile (AVRCP), you can use this player's remote control to play music stored
on the device.
1. Pair your device with the player.
2. Start to play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To pause/resume play, press the
BF button on the main unit or the BF / PAIR button on the remote control.
- To skip to a track, press the
H
/
G
buttons on the remote control or on the main unit.
FM Operation
Auto Scan and Save Preset Station
1 Press the ON/OFF/SOURCE button repeatedly on the unit or press the FM button on the remote control to select FM mode.
2 Press and hold the PROG button for a few seconds to activate automatic programming. All available stations are programmed in the
order of waveband reception strength.
The first programmed radio station is played automatically.
3 Press the

or

buttons on the remote control to select a preset number that you want.
Tuning in a Station
Press and hold the
H
/
G
buttons on the remote control or on main unit, the frequency changes up or down automatically until a station is
found. Press the
H
/
G
buttons on the remote control or on main unit repeatedly until you find the station you want.
Presetting Stations Manually
You can preset up to 20 FM stations.
1 Tune in the desired station, then press the PROG button on the remote control.
2 Press the

/

buttons on the remote control to select the preset number.
3 Press the PROG button on the remote control to store the station.
4 Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
Troubleshooting