Activate and Deactivate the Alarm Timer
- Press the
ALARM (1 or 2)
buttons repeatedly to activate or deactivate the timer.
- If the timer is activated, [
AL1
] or [
AL2
] is displayed on the front of the unit.
- If the timer is deactivated, [
AL1
] or [
AL2
] will disappear from the display on the front of the unit.
Repeat Alarm
You can press to adjust the interval to repeat alarm. When the alarm rings, press the
SNOOZE/DIMMER
button on main unit or the
SNOOZE
button on remote control. The alarm repeats ringing
9
minutes later.
Stop Alarm Ring
When the alarm rings, press the corresponding
ALARM (1 or 2)
button. The alarm stops, but the alarm settings remain.
View the Alarm Settings
Press the
ALARM (1 or 2)
buttons to view the alarm settings.
General Operation
Standby/ON
• When you first connect the unit to the main socket, the unit will be in
STANDBY
mode.
• Press the
ON/OFF/SOURCE
button on the main unit or the
button on the remote control to switch the main unit
ON
.
• Press and hold the
ON/OFF/SOURCE
button on the main unit or press the
button on the remote control to switch the main unit back to
Standby
mode.
• Disconnect the main plug from the main socket if you want to switch the unit off completely.
- If there is no signal under the Bluetooth, DOCK, LINE IN mode, the unit will automatically be switched off within 15 minutes.
Select Modes
Press the
ON/OFF/SOURCE
button on the main unit repeatedly or the
DOCK
,
LINE IN
and
BT
/
FM
buttons on the remote control to
select the desired mode. The selected mode will show on the display.
Adjust Display Brightness
Press the
SNOOZE/DIMMER
button on main unit or the
DIMMER
button on remote control repeatedly to select different levels of display
brightness.
Select a Preset Sound Effect
During play, press the
EQ
button on remote control repeatedly to select:
[POP], [CLASSIC], [ROCK], [JAZZ], [FLAT].
Adjust the Volume
- During play, press the
VOL+/-
buttons on remote control or on main unit to increase/decrease the volume level.
- If you wish to turn the sound off, press the
MUTE
button on the remote control. Press the
MUTE
button again or press
VOL +/–
buttons on remote control or on main unit to resume normal listening.
Set the Sleep Timer
This unit can switch to standby automatically after a set period of time.
1 Press the
SLEEP
button on remote control repeatedly to select a set period of time (in minutes).
• When the sleep timer is activated, the display will show
“”
and the volume will gradually decrease before the unit powers off.
2 Press the
SLEEP
button on remote control repeatedly until [
OFF
] is displayed.
• When the sleep timer is deactivated,
“”
disappears from the display.
LINE IN Operation
Содержание DS406
Страница 1: ......
