RSR CL02, Руководство пользователя

Страница: 9 / 26

7
General Operation
Turn ON/OFF
When you first connect the unit to the mains socket, the unit will be in STANDBY mode.
• Press the
button to turn on.
• Press the button again to turn off.
- Disconnect the mains plug from the mains socket if you want to switch the unit off completely.
- If there is no signal under the DOCK/LINE IN /Bluetooth modes, the unit will automatically
switch off with in 15 minutes.
Select Modes
Press the button repeatedly to select
LINE IN
or
FM
or
Bluetooth
or
DOCK
mode.
Adjust the Brightness
In standby mode, press the NAP/DIMMER button to select brightness level.
Set the NAP Timer
- Press the NAP/DIMMER button repeatedly to select time (in minutes):
90
60
30 15 00
- The system is now set to buzzer after the number of minutes you have set.
Set the Clock
In standby mode, The built-in clock shows the correct time in the display.
1 In standby mode, press and hold the
CLOCK button to activate the clock setting mode, time
indicator will blink.
2 Set the minute with the TU+/
G
button.
3 Set the hour with the
H
/ TU- button.
4 Press the
CLOCK
button to confirm, the built-in clock starts operating and the seconds start
counting from 0.
Tip:
During Time Setup, press the
BF
/PAIR
button to select 12/24 hour format.
• Time Display
- During play, press the CLOCK button to show the current time on the display for a few seconds.
Set the alarm timer
You can set two alarms which wake up at different time. However the clock must be set correctly
for the timer function to work.
1 In standby mode, press and hold the
AL1 or AL2 button for several seconds, time indicator will
blink.
2 Set the minute with the
TU+/
G
button and set the hour with the
H
/
TU-
button.
3 Press the
VOL-/AL1
or
VOL+/AL2
, then press
H
/
G
buttons to select an alarm sound source:
buzz, FM, iPod.
4 Press the VOL-/AL1 or VOL+/AL2 button, volume indicator will blink. Set the alarm volume with
the
H
/
G
buttons.
5 Press the VOL-/AL1 or VOL+/AL2 button to confirm.