RSR CL02, Руководство пользователя

Страница: 12 / 26

10
Listening to the FM Radio
Auto Scan and Save Preset Station
- Ensure that you have connected and fully extended the FM aerial.
1 Press the button to switch
FM mode.
2 Press and hold the
BF
button for few seconds to activate automatic programming. All
available stations are programmed in the order of waveband reception strength.
- The first programed radio station is played automatically.
• Tune to a Preset Radio Station
- To select and listen to a saved radio station, press the
BF
button to skip to the next preset
radio station.
Tuning in a Station
- Press the
H
/ TU- or TU+/
G
buttons repeatedly until you find the station you want.
- Press and hold the
H
/ TU- or TU+/
G
buttons, the frequency changes down or up
automatically until a station is found.
Presetting Stations Manually
- You can preset up to 20 FM stations.
1 Tune in the desired station, then press and hold the
MEM / SLEEP button, the station will be
stored and the screen will then show the preset number.
Note:
The unit will switch the Stereo or MONO channel to receive the FM radio mode automatically, it can
get the best effect.
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when
using this unit, check the following points before requesting service.
No power
- Ensure that the AC cord of the apparatus is connected properly.
- Ensure that there is power at the AC outlet.
- Press button to turn the unit on.
Poor radio reception
- Increase the distance between the unit and your TV or VCR.
- Fully extend the FM antenna.
Timer does not work
- Set the clock correctly.
- Switch on the timer.