RSL VOCE, Руководство по уборке

Страница: 10 / 11

Vl
(I)
n
.-+
o·
::J
.i:,.
I
n
::J
::J
OQ
cu
::J
a.
,0
(I)
::J
OQ
-,
0, n
(I)
a.
C
-,
(I)
5. Refit the CoEx ® brewer unit into the machine. Slide the
unit into place until it " clicks " into position. Refit the
coffee dispense pipe to the brewer outlet as shown.
Ensure that both the fresh bean co n t ai n e r and fresh
ground coffee canister are filled with correct product.
Refill if necessary following the procedures outlined in
sub-section 4 . 5.6 Fresh Bean Canister - B2C m ac h ines .
4 . 7 . 2 Weekly Cleaning Procedure
VOCE
The VOCE has a routine cleaning cycle for the CoEx ® brewer, with a warning message to indicate
a clean is "Recommended" or "Required". If the "Required" message is ignored B2C and
fresh brew drinks cannot be selected until the brewer is cleaned, using the following procedure :
1.
2 .
Open the front door of the machine.
Caution: Ensure that a suitable container is placed under the dispense position. Keep
hands away from the dispense area whilst the cleaning cycle is in operation .
Press and release button 11 on the service keypad. The
LCD will display the message "Please Place Cleaning
Tablet in B rewer" .
Take one cleaning tablet (supplied in packs of 30 - CMS
part no. ZC10598000) and place it into the brewer
piston chamber as shown.
3. Press the START/? key on the drink selection keypad to
begin the CoEx
®
tablet cleaning routine .
4 . The cleaning cycle lasts approximately 7 minutes and dispenses approximately 1.8 ltrs
of water through the dispense head . The LCD will display the message "Cleaning in
Progress" throughout the cleaning cycle .
..&.
Safety First! Keep hands clear of the brewer mechanism during the cleaning routin e .
5 . When the cleani ng cycle is complete the LCD will display the message "C l ea n i n g Cycle
Co m p l e t e". Press the X (Exit) key on the drink selection keypad to return the machine
to standby mode. Empty the water from the conta i ner .
4.8 Brewer Waste Container and Chute - Daily Clean
1. Remover the brewer guard.
2. Remove the brewer waste container and empty the
contents. Push up and remove the waste chute (a).
3 . Wash both the container and chute thoroughly and if
necessary sanitise using the diluted bactericidal
solution.
Rinse in clean water