Operation
Start the musical source and turn its volume up to approximately 60%, if
possible. Press the round power button on the speaker base and observe that the
green LED is lit. This indicates that the speakers are operating. Adjust the speaker
volume to the desired listening level using the Up/Down controls on the satellite
speaker base. Check that sound is heard from all Speakers.
Note: If you would like to have the volume control on the right side,
simply slide both speakers forward off the bases and switch them.
Troubleshooting
Symptom
Possible Cause/Solution
No sound is heard from
either speaker
Sound is heard from only
one speaker
Make sure unit is plugged into an AC outlet that
has power.
Unit not turned on. Make sure power button is
pressed on speaker base and that green LED
is lit.
Volume is too low - press ^ (up arrow) button
on speaker base.
Audio cable (green plug) is not plugged into a
correct sound source.
Sound source is not working or output level is
very low. Turn up volume at sound source.
Speakers are not connected together properly.
Connect RCA cables properly-see diagram.
Be sure to turn the Power off on your speaker system when unplugging or
plugging cables!
3
