Step 4:
Using 12mm Wrench tighten Jam nut on to grab bar mount
Step 5:
Align grab bar and tighten bottom caps of grab bar mounts using 4 mm Allen wrench
LIMITED WARRANTY
RSI Racing
warrants this product to be free from defects in material and workmanship under use for the purpose it was intended.
RSI Racing
shall not be liable for damage or injury caused by defective materials or workmanship.
RSI Racing
may elect to repair or
replace this product, but RSI Racing is the sole judge of any defects in their product. This warranty does not cover any labor costs to
remove or reinstall this product and is effective for one year from the original purchase date.
RSI Racing 15250 Hornsby St Forest Lake, MN 55025 208-994-6413
