1. Mounting
>
Use proper tools and hardware.
>
Mount indoor in a temperature-controlled environment.
>
Mount keypad at height that provides proper viewing and
convenience for the customer.
>
Mount in a location that provides customer convenience but
out of view from windows.
1
Separate base from Keypad.
2
Hold base against mounting surface and mark the three
mounting holes. Use the left or right side to level the
keypad.
3
Drill pilot holes and install anchors where needed.
4
Place base on mounting surface so holes line up with
pilot holes/anchors and secure base with appropriate
screws.
5
Attach Keypad to base and secure by turning the button to
the closed padlock symbol.
Note: The XMB611 Keypad is a supervised device and must be
permanently mounted. This product is not intended
for portable use.
Mounting Holes
2. LCD Overview
Icons for entry mode:
a..z
Lowercase
A..Z
Uppercase
123
Keypad
&@# Symbols
Icons for arming mode:
Partition 1 or SP1 selected
Partition 2 or SP2 selected
Unused
External arming mode selected
Unused
Information Icon
Low Battery Icon
I N S T A L L A T I O N D A T A S H E E T
www.videofied.com.au
Keypad XMB711
