ASSEMBLY OF THE RSI SMARTCANOPY
5
STEP
FIVE
1.
ALIGN THE FRONT END TO THE SIDE PANELS AND ROOF ASSEMBLY, THE FL, FR RED ORIENTATION
STICKERS SHOULD BE ON THE SAME SIDE. USING THE M6 FASTENER BLOCKS AND ITS RELATIVE
FASTENERS, BOLT THE FRONT FLANGE TO THE SIDE PANEL AND ROOF. TIGHTEN SUFFICIENTLY.
(PLEASE SEE IMAGE BELOW FOR ORIENTATION OF M6 FASTENER CLIP)
PLEASE NOT THAT RSI LOGO ON ALL THE M6 FASTENER BLOCKS MUST BE FACING THE REAR OF THE
2.
E
CANOPY. THE LOGO MUST ALSO BE THE RIGHT SIDE UP AND NOT UPSIDE DOWN.
WHEN ASSEMBLING CANOPY WILL BE UPSIDE DOWN SO ALL LOGOS MUST BE FACING THE REAR AND BE
UPSIDE DOWN,SO LATER ON WHEN CANOPY IS TURNT
RIGHT SIDE UP,ALL LOGOS ARE IN THEIR CORRECT ORIENTATION.
3.
STEP
SIX
1.
ALIGN THE REAR FLANGE TO THE SIDE PANEL AND ROOF ASSEMBLY, THE RL, RR BLUE ORIENTATION
STICKERS SHOULD BE ON THE SAME SIDE. USING THE M6 FASTENER BLOCKS AND ITS RELATIVE
FASTENERS, BOLT THE FRONT FLANGE TO THE SIDE PANEL AND ROOF. TIGHTEN SUFFICIENTLY.
(PLEASE SEE IMAGE BELOW FOR ORIENTATION OF M6 FASTENER CLIP)
PLEASE NOT THAT RSI LOGO ON ALL THE M6 FASTENER BLOCKS MUST BE FACING THE REAR OF THE
2.
CANOPY. THE LOGO MUST ALSO BE THE RIGHT SIDE UP AND NOT UPSIDE DOWN.
WHEN ASSEMBLING CANOPY WILL BE UPSIDE DOWN SO ALL LOGOS MUST BE FACING THE REAR AND BE
UPSIDE DOWN, SO LATER ON WHEN CANOPY IS TURN
RIGHT SIDE UP, ALL LOGOS ARE IN THEIR
ED
CORRECT ORIENTATION.
RSI LOGO SHOULD BE UPSIDE DOWN
RSI LOGO SHOULD BE UPSIDE DOWN AND FACING
THE REAR FLANGE
