RSE SC52, Руководство по установке и эксплуатации

Страница: 5 / 12

4
Mounting Preparation
This dish system must be installed on the roof of the motorhome/caravan. Care must
be taken to ensure adequate space is provided to allow for the operation and rotation
of the system. Allow for clearance from vents, roof hatches and air conditioning units.
Where possible ensure the system is installed on a level section of the roof line as this
will ensure the minimum acquisition time. Listed below are the parameters of surface
area required.
From the centre of the dish rotation pivot a radius of 260 mm is required to a height of
500 mm from the roof.
Overall Dimensions
Base length 420 mm
Width 300 mm
Overall length (including dish) 825 mm
Overall width (including dish) 540 mm
Overall height (closed) 165 mm
Overall height (open) 730 mm
Weight 11.3Kg
Before installation, ensure the roof base has sufficient strength for the support of the
dish system. The mounting plate can be drilled, screwed and sealed to the roof,
(ensure adequate sealing to prevent any water leaks)
OR it can be fixed using an
adhesive sealant ensuring all of the manufacturer’s directions are followed and
sufficient time for the product to cure correctly is allowed. Alternatively a 3M bonding
tape and primer spray can be used, for more information on this product please contact
RSE.