IDM 503 / 505 English
23
Measurement
Category
Application
I
Measurements on circuits not directly connected to mains.
Examples include: Measurements on battery powered equipment
and specially protected (internal) mains-derived circuits.
II
Measurements on circuits directly connected to the low voltage
installation. Examples include: Household appliances, portable tools
and similar equipment.
III
Measurements performed in the building installation.
Examples include measurements on distribution boards, junction
boxes, socket-outlets and wiring and cables in the fixed installation.
IV
Measurements performed at the source of the low-voltage
installation. Examples include measurements on primary
overcurrent protection devices and electricity Instruments
Weight
: (630g) including battery.
Dimensions (W x H x D)
: 95mm x 207mm x 52mm with holster.
Accessories Supplied
: 4 x 1.5V AA batteries (installed), Test lead set , type K
thermocouple bead sensor , PC software on CD ROM and user manual.
Power Requirements
: 1.5V x 4 IEC LR6 or AA size.
Pollution degree
: 2
EMC
: EN 61326-1
Shock vibration
: Sinusoidal vibration per MIL-T- 28800E (5 ~ 55 Hz, 3g maximum).
Drop Protection
: 4 feet drop to hardwood on concrete floor.
Indoor use only.
