Document Number 900-21806 Rev C
11
0
MAX.
0
1
2
3
LOAD
VOLTS
LINE
AMPS
LOAD AMPS
SPEED
LOW
HIGH
OUT
IN
ON
RESET
IRIS
FOCUS
ON
START
AUX.
INPUT
OFF
NEUTRAL
MIN.
CAMERA
REEL
POWER
OFF
STOP
HIGH
LOW
NORMAL
VIDEO LEVEL
A.C. VOLTAGE
FREQUENCY
R.S. TECHNICAL SERVICES INC.
Crawler Operation
Ensure that the Camera ON/OFF switch is in the
OFF
position before connecting camera
to tractor unit, or auxiliary control box to the Controller Power Supply.
Set the LIGHT INTENSITY control to
“MINIMUM”,
or full counter clockwise position.
Set the REEL SPEED control to the
‘MINIMUM”,
or full counter clockwise.
When power is applied to the controller power supply, the Frequency and Voltage
indicators will be in the normal range.
Controller Power Supply
Camera control on the Controller Power Supply
The adjustable camera power supply provides a nominal 120V DC to the camera,
transporter, and other down-hole inspection equipment. This section has video processing
circuitry which extracts the video transmitted by the under ground camera into a NTSC
video format. Also incorporated in to the controller is an audio microphone preamplifier,
which provides audio for a VCR.
The Camera ON/OFF switch controls the camera power supply. Above the switch is a
green LED to indicate that the camera power supply is
on
.
The Camera POWER control knob adjusts the output Voltage of the power supply. This
control adjusts the light intensity of the remote camera. This also can adjust adjusts speed
of the transporter unit.
To engage Crawler in forward gear, turn on Controller Power Supply, and press
“Tractor/ Low Speed”
on Auxiliary Control Box.
To change speed of Crawler, press
“Tractor/ Med.”
or
“Tractor / High Speed”
on
Auxiliary control box.
Always start the Crawler in the “Tractor / Low Speed”.
Содержание 32-05000
Страница 16: ...Document Number 900 21806 Rev C 16...
