Non-Contact Forehead IR Thermometer
Non-Contact Forehead IR Thermometer
8
9
10.Measuring Operation
10-1.Choosing The Temperature Unit – F1 Function
Press “
MODE
” button for 2 seconds, the screen displays: F1. Select
“
DOWN
” for degrees Celsius, “
UP
” for degrees Fahrenheit.
10-2.Alarm Setup – F2 Menu
Press
“
MODE
“
touch
for
2
seconds,
the
screen
displays:
F1.
Press
twice
“
MODE
“ touch to get F2. Select “
UP
” to increase
the
threshold by
0.1°C (0.1°F), “
DOWN
“ to reduce it by 0.1°C (0.1°F).
Note:
The alarm threshold default value is 38°C (100.4°F).
10-3.Total Difference – F3 Menu
To adjust the total variation of your the Non-contact Body Infrared
Thermometer.
Press “
MODE
” button for 2 seconds, the screen displays: F1. Press
“
MODE
“ button two times to get F3. Select “
UP
“ to increase the
difference by 0.1°C (0.1°F), “
DOWN
“ to reduce itby 0.1°C (0.1°F).
In
the cases of seasonal or environmental changes a verification and
adjustment should be carried out.
Note:
This function is only effective
-
Body
10-4.Buzzer ON/OFF – F4(F3) Menu
Press “
MODE
” button for 2 seconds, the screen displays: F1. Press
three(two) times “
MODE
“ button to get F4(F3).
Select “
UP
” to open the buzzer (a sound icon “ “ is displayed on
the LCD screen), press “
DOWN
“ to stop it (the icon disappear).
10-5.Exiting The Setting Mode
Press “
MODE
“ button until the screen turns off.
10-6.
The Non-contact Body Infrared Thermometer is specially designed
to take the body temperature of a human being. For this, use the
Body mode. Measurement range for Body mode: 32 to 42.5°C (86
to 108°F)
You can also use the Non-contact Body Infrared Thermometer to measure
the temperature of an area or an object, a food, a liquid or a room
temperature. For this, use the Surface mode. Measurement range for
Surface mode: 0 to 60°C (32 to 140°F)
Important:
The area temperature differs from the internal body
temperature. To obtain the internal temperature always use the Body
mode.
Please make sure to select the Body mode for an internal temperature
reading and the Surface mode for an external area reading (bottle,
bath, room…).
1
0
-7.Data Memory
Data memory automatically after temperature measurements, which
will display at the right corner of LCD. Press “
UP
“ or “
DOWN
“ button
to display the last temperature measurement.
Under the condition of power off, press “
UP
“ and “
DOWN
“ button
together for two seconds, to display the last temperature measurement.
At this mode if change the order number to 0 and press “
MODE
“
button, then delete all memory data.
1
0
-8.Changing The Batteries
Display: when the LCD screen displays “ “, the battery is used.
Operation: Open the lid and change the batteries, taking great care
with the correct positioning. A mistake with this could cause damage
to the apparatus and compromise the guarantee of your Non-contact
Body Infrared Thermometer. Never use rechargeable batteries. Use
only batteries for single usage.
Remove the battery from the instrument if it is not required for extended
periods of time in order to avoid damage to the thermometer resulting
from a leaking battery.