OPERATION INSTRUCTIONS / EN
EN-10
10/15/10 Version No. 00
4-3 To erase the memory of the Datalogger
Press "
" key to turn off the meter.
Press and hold down the "MEM"
key then press "
" key turn on
the meter. The LCD display will
show "CLr" and all data stored in
memory will be cleared.
4-4 To Trigger "One by One Datalogging"
Press the "MEM" key once and
one set of readings will be stored
in memory. The LCD display
shows " MEM " and a memory
location number (01 to 98).
Press "READ" key to enter the
manual memory data mode. The
LCD display will show " READ "
and a memory location number.
Press "
" or "
" key to scroll through the logged readings.
Press " READ" key again to exit READ mode.
