14
15
Multifunction Installation Tester/English
Multifunction Installation Tester/English
13/08/2017 Version No. 001
13/08/2017 Version No. 001
F1 Button:
Pop-up and shutdown Loop/PFC menu, Shutdown mode is activated when the user selects.
F2 Button:
Pop-up and shutdown Current menu, Shutdown mode is activated when the user selects
F3 Button:
None
F4 Button:
Press the F4 button 3S, triggering zero function.
Up Button:
Up menu to select the current active sub-options.
Down Button:
Down menu to select the current active sub-options.
Enter Button:
Confirm the user select mode.
1-When measuring is completed, impedance of
L-PE and PFC (lf) value appears on the screen
2-Press TEST button if re-test is necessary.
When symbol from , ,
appears lower left corner, and if the voltage
exceeds 260V, the measurement will not take place
1-Turn the rotary switch to the LOOP / PFC position
2-Press F2 button to change from No Trip to Hi Amp
3-Connect the test leads as shown in the Figure 8
4-If voltage of the L-PE on the lower left appears, the
unit is ready to TEST
5-Press the TEST button when ready
5.2.3-Using the Hi Amp LOOP Measurement to be
selected where the circuit is NOT protected by the
inclusion of an RCD
5.2.2-LOOP / PFC Function Menu Operation
Main Display
Menu Display
Figure 5 No Trip-Measurement completed
Figure 6 Hi Amp Loop-Standby screen
Figure 8 Hi Amp LOOP-Test lead connection
Figure 7 Hi Amp LOOP-To be used where
NO RCD is present
