RPS micromag series, Руководство по эксплуатации

Страница: 17 / 30

M
ICRO
M
AG
-OP-EN
- 17 -
ADJUST SOLUTION FLOW:
1. Push down on the Solution Flow Lever (A) to increase
the solution fl ow and push up on the lever to decrease
solution fl ow
(SEE BELOW) .
DRAINING SOLUTION TANK:
To drain unwanted cleaning solution from the Solution
Tank, perform the following steps:
(SEE BELOW)
1. Pull the clear Sight Tube/Drain
Hose (A) off barbed fi tting.
NOTICE
Get Supervisor APPROVAL fi rst and drain at
APPROVED locations only.
2. Rinse out Tank and Solution Flow
system with clean water.
DRAINING RECOVERY TANK:
Always empty Recovery Tank when refi lling the Solution
Tank. You can refi ll the Solution Tank while the Recovery
Tank is draining. To drain the Recovery Tank remove Drain
Hose
(B) from hook at rear of Tank and pop off cap (SEE
BELOW) . Rinse with fresh water.
NOTICE
Leave Recovery Lid open while draining Tanks. Rinse
thoroughly.
NOTICE
Get Supervisor APPROVAL fi rst and drain at
APPROVED locations only.
OPEN RECOVERY LID:
1. Rotate Tank Lid (B) forward and full open to rest
in a tipped open position (SEE ABOVE) .
A
A
B